Tempest
Accessories
Tempest Ingredient Input Tubes – 12” or 24” Lengths (Part# TInT12 & Part# TInT24)
Additional ingredient input tubes for your Tempest system that can be purchased in 12” or 24” lengths. 12 tubes per pack.
Tempest Silicone Nozzle Strips (see below for Part#)
Replacement silicone nozzle strips for low & high volumes as well as HV Drop Arrays:
Low Volume Standard (0.15mm inner diameter) – part# 204694
High Volume Standard – Drop Array 1st drop (0.35mm inner diameter) – part# 207059
High Volume Drop Array 2nd drop (0.25mm inner diameter) – part# 207061
High Volume Drop Array oil (0.35mm inner diameter) – part# 207060
Tempest Perfluoroelastomer Chips (Part# TPCL & Part #TPCH) Coming Soon
A perfluoroelastomer chip that is optimized for maximum chemical compatibility. These chips are available in low volume (1µl and 0.2µl diaphragm size) or high volume (5µl and 1µl diaphragm size). Comes with silicone nozzles.
Tempest Silicone Chips (Part# TSCL & Part# TSCH)
A silicone chip that is optimized for maximum speed. These chips are available in low volume (1µl and 0.2µl diaphragm size) or high volume (5µl and 1µl diaphragm size). Comes with silicone nozzles.
Tempest Silicone Wash Station Strip (Part#204699)
A replacement strip for the Tempest wash station.
Pump Box for Tempest Systems (Part# PB)
Connect your Tempest to a pump box specifically designed to provide the required amounts of pressure and vacuum.
Venturi Vacuum Generator for Tempest Systems (Part# VENT)
Use your laboratory's pressure source to create the required vacuum with a venturi vacuum generator.